Search found 97 matches
- Fri Aug 19, 2022 12:17 pm
- Forum: Keel
- Topic: C22 Keel Bracket/Pin Kits for Sale
- Replies: 14
- Views: 61004
Re: C22 Keel Bracket/Pin Kits for Sale
I still offer the brackets sets. Unfortunately I have had to raise the price a little. I'll edit the entry to reflect the current price. Please if you are interested, send me a PM and I'll get back to you. Sometimes I'm not on here often, but I'll try to check my PMs every few days. Cheers, Dan
- Mon Jul 09, 2018 5:41 am
- Forum: Keel
- Topic: C22 Keel Bracket/Pin Kits for Sale
- Replies: 14
- Views: 61004
Re: C22 Keel Bracket/Pin Kits for Sale
Hey Guys, Sorry for the long silence. I don't check in as often as I should. Yes, Brackets are still available. send me a PM in you are interested.
Cheers,
Dan
Cheers,
Dan
- Tue Apr 03, 2018 9:13 am
- Forum: General Chrysler Sailing Discussion
- Topic: In the water 24/7
- Replies: 4
- Views: 19655
Re: In the water 24/7
I kept mine on Lake Pepin for a season a few years back. It went in with fresh bottom paint and came out with and impressive green crud. Do to the time constraints when I pulled it out I wasn't able to wash it off. In the spring it was like concrete. I think with a quick pressure washing of the bott...
- Tue Dec 19, 2017 9:30 pm
- Forum: General Chrysler Sailing Discussion
- Topic: Mi Amor restoration
- Replies: 12
- Views: 30898
Re: Mi Amor restoration
Vikings are great but the wood wing scares people away. Years ago I did some flight training in Alexandria. The factory wasn’t making airplanes anymore but they were still servicing them. I remember flying into Milaca years ago to. They had a gravel runway at that time. I think they were in the proc...
- Mon Dec 18, 2017 8:05 pm
- Forum: General Chrysler Sailing Discussion
- Topic: Mi Amor restoration
- Replies: 12
- Views: 30898
Re: Mi Amor restoration
There are a lot of Chrysler’s in the upper Midwest. One day out on lake Peppin a few summers ago I saw three 22’s (not including mine) and a 26. I noticed the Honda in the back. I have a 22 so it would be tough to find a spot for a generator outside the cabin. I wish I had a 26. That has to one of t...
- Mon Dec 18, 2017 11:20 am
- Forum: General Chrysler Sailing Discussion
- Topic: Mi Amor restoration
- Replies: 12
- Views: 30898
Re: Mi Amor restoration
Skipper Dan, Nice work. I like the electric sail-drive. We did something similar with our 22 but kept the outboard power head. It was a fun project. It takes a little thinking to operate a outboard below the water line. It's been very reliable but I see an electric conversion in my future. :D I like...
- Tue Jun 13, 2017 12:21 pm
- Forum: General Chrysler Sailing Discussion
- Topic: some questionable issues
- Replies: 11
- Views: 39094
Three or four layers of glass mat were added. that picture was taken before the other side of the hole was filled. The hole was drilled because she sat in a boat yard and it's more economical for them to put a hole in the hull then to take a ladder and pump out every boat when it rains That makes s...
- Tue Jun 13, 2017 6:40 am
- Forum: General Chrysler Sailing Discussion
- Topic: some questionable issues
- Replies: 11
- Views: 39094
It looks like it was damaged from the keel swinging too far forward and contacting the forward part of the trunk. I think this is fairly common, happens when the cable brakes. I did a small repair on mine in that location. Mine didn't compromise the hull at all just exposed a few layers of glass. It...
- Wed May 17, 2017 11:57 am
- Forum: General Chrysler Sailing Discussion
- Topic: C22 repower
- Replies: 13
- Views: 39373
It all depends on the conditions. If it is calm and flat you can get away with a fairly small motor. I have a 10hp sail drive now. But when we used an outboard we had a 6hp Evinrude. It worked well but I wouldn't consider anything smaller. But we launch out of a Marina and needed to motor in and out...
- Fri Mar 24, 2017 9:31 am
- Forum: Keel
- Topic: C22 Keel Bracket/Pin Kits for Sale
- Replies: 14
- Views: 61004
C22 Keel Bracket/Pin Kits for Sale
Hello everyone, The kit includes the two brackets, pin, and pipe plug. They will need to be match drilled for your boat(The hole pattern on my boat was clearly done by hand. I was worried that it would be slightly different from boat to boat). These are well made brackets. They are made from 304 sta...
- Fri Mar 24, 2017 9:30 am
- Forum: General Chrysler Sailing Discussion
- Topic: C22 Keel Bracket/Pin Kits for Sale
- Replies: 1
- Views: 8321
C22 Keel Bracket/Pin Kits for Sale
Hello everyone, A few years ago I was talking with Scott about making several Keel Bracket/Pin Kits. The plan was to make enough to get the costs down, sell at a good price and have a little left over to help fund the forum. Life got in the way and the next thing I know a few years have passed. I ha...
- Thu Jan 05, 2017 10:44 am
- Forum: General Chrysler Sailing Discussion
- Topic: Batteries and Charging - How do you power your boat?
- Replies: 16
- Views: 37795
James, Here is a link to a battery charging kit that fits the 6hp Evinrude. Unfortunately the kit is unavailable on this site but it may be helpful to reference these part numbers when searching the web. Ebay may be your best bet. http://www.marineengine.com/parts/johnson-evinrude-accessories/index....
- Mon Jan 02, 2017 10:58 am
- Forum: General Chrysler Sailing Discussion
- Topic: Batteries and Charging - How do you power your boat?
- Replies: 16
- Views: 37795
James, It all depends on how you use your boat. I normally just day sail and occasionally spend one night on the water. I have a 105 amp hour deep cycle and it is more than enough for what I do. The CD/Radio is the biggest single current draw on my boat at about 1 to 1-1/2amps. I switched all the li...
- Tue Dec 06, 2016 9:06 am
- Forum: General Chrysler Sailing Discussion
- Topic: KNOT SURE pics online
- Replies: 11
- Views: 23637
- Thu Oct 20, 2016 9:05 am
- Forum: General Chrysler Sailing Discussion
- Topic: Capt.
- Replies: 4
- Views: 15842
Thanks for sharing! It sounded like a great trip. I loved the photos. It's been on my bucket list to tow our 22 up to the apostles for a long weekend. We almost did this summer for our wedding anniversary (we were married on a sailboat in the apostles) but at the last minute the wife decided a few d...
- Mon Jul 18, 2016 10:29 am
- Forum: General Chrysler Sailing Discussion
- Topic: Keel position when trailering
- Replies: 7
- Views: 19394
- Wed Jul 06, 2016 11:25 am
- Forum: General Chrysler Sailing Discussion
- Topic: New C-22 Rigging
- Replies: 13
- Views: 21089
Walt, Most of your questions could be answered the the document section of this website, but it seems the document section is down right now. I have my C22 literature right here so I will attempt to answer below. 1: The manual doesn't call out the diameter, they list the length as 29ft each. That is...
- Wed Jul 06, 2016 11:10 am
- Forum: General Chrysler Sailing Discussion
- Topic: First sails on the C-22: some thoughts and questions
- Replies: 10
- Views: 21269
Tiller length: When we rebuilt our rudder assembly we made a new tiller handle. I don't know the exact length, but we did shorten it from the original. Overall it is an improvement. The song of the Keel Cable! Yes it is comforting. Like most owners I pondered how to quiet it. Before I came up with a...
- Wed Jul 06, 2016 10:48 am
- Forum: General Chrysler Sailing Discussion
- Topic: Keel position when trailering
- Replies: 7
- Views: 19394
- Thu Sep 03, 2015 6:50 am
- Forum: General Chrysler Sailing Discussion
- Topic: What type of motor can move my C22?
- Replies: 8
- Views: 20982
We used to have a 6hp Evinrude on ours. It worked well enough, but I wouldn't run anything smaller. Now we have a sail drive we built out of a 9.9hp Evinrude. It was a complicated and time consuming build, but it has held up great over the years. It's so nice to have electric start, controls in the ...
- Mon Jun 29, 2015 2:26 pm
- Forum: General Chrysler Sailing Discussion
- Topic: Help with 1978 16' Mutineer
- Replies: 3
- Views: 10593
I have one, it's a fantastic boat. Be sure to check out http://www.mutineer15.org/ You will find all the info you need there. $400 is a great deal if it doesn't need much work. I paid $1000 for mine (1980 Chrysler/TMI model) several years ago, but it was above average condition. They are easy to sai...
- Fri May 29, 2015 11:40 am
- Forum: General Chrysler Sailing Discussion
- Topic: Chrysler 22 in the open ocean.
- Replies: 8
- Views: 14747
- Thu May 28, 2015 7:44 am
- Forum: General Chrysler Sailing Discussion
- Topic: Chrysler 22 in the open ocean.
- Replies: 8
- Views: 14747
- Thu May 14, 2015 1:31 pm
- Forum: General Chrysler Sailing Discussion
- Topic: I saw you today!
- Replies: 3
- Views: 8702
- Tue Feb 03, 2015 7:45 pm
- Forum: General Chrysler Sailing Discussion
- Topic: Finnaly
- Replies: 19
- Views: 40725
- Fri Jan 23, 2015 6:46 am
- Forum: General Chrysler Sailing Discussion
- Topic: Make my own galley for C22?
- Replies: 9
- Views: 18675
- Fri Jan 09, 2015 8:07 am
- Forum: General Chrysler Sailing Discussion
- Topic: Make my own galley for C22?
- Replies: 9
- Views: 18675
- Fri Jan 09, 2015 8:05 am
- Forum: General Chrysler Sailing Discussion
- Topic: C22 BLEW BY YOU
- Replies: 11
- Views: 20017
I have a friend over in Fountain that bought a seaplane. He took a lot of crap over the no lake thing. lol.. If you plan to do any sailing in the area, Lake Pepin and Lake Onalaska would probably be the closest. Pepin is a great sailing lake, Onalaska is OK. I have never sailed my 22 on Onalaska but...
- Thu Jan 08, 2015 12:50 pm
- Forum: General Chrysler Sailing Discussion
- Topic: Make my own galley for C22?
- Replies: 9
- Views: 18675
- Mon Jan 05, 2015 9:45 am
- Forum: General Chrysler Sailing Discussion
- Topic: C22 BLEW BY YOU
- Replies: 11
- Views: 20017