Chrysler Sailors Forum

Hey everybody I just saw this C-22 came up in my area of Michigan. This boat belonged to a member of the board named Richard I think ? I meet with him once to buy some his interior cushion from his spare parts boat. When I was there he showed me the boat that he had restored using the spare boat and...

http://sphotos.xx.fbcdn.net/hphotos-ash4/319744_4014732251240_1369324345_33519678_743611975_n.jpg Thanks everyone for all the tips! My weekend was saved because of them. My solution to get me through the weekend was to use a 4x6 and wedge it between the hatch and the base of the mast. Then I connec...

I have to agree with Chrysler20%26, I have helped salvage a few boats and most of them have been in there slips at the marina. Usually they are the boats that sit in the slip all year without anyone to look after them... but then again, there was this time in Oklahoma.... (My apologies for the poor ...

A picture is worth a thousand words.

What to do?

I am going to need some help from you guys on this one. My issue is that the hole in the base of my (c22) mast, Which normally holds the pin for stepping the mast with the boom/gin pole, has sheared in a way that makes the hole unusable... Does anyone have a system for raising the mast that does not...

I am interested in installing a sound system also. I have been assuming that the whole system would be a major drain on the batteries though. How many batteries are you running in your system?

Thank You John and Leatherneck! I will be sure to post some photos of the entire painting process. Again thanks for the measurements, I dont know what I would do without all the help from everyone.

Thanks in advance

So I am going to try to tackle painting the bottom tonight. The only problem is that the previous owner of my boat painted over the waterline. It would just be great if one of you guys wouldn`t mind taking a measurement on one of your boats. I am looking for three measurements; Transom, Beam, and bo...

Richard, Your a life saver, all the parts and pieces I got from your parts boat have really helped to make my 22 some to be proud of.

Well I just want to give a quick update on my newly christened Chrysle 22 "Float On". Since my last I have been at work on the restoration. My first task was to give the interior, cock pit, and top deck a proper washing. I took the advice from the board and used bleach paired with a power ...

Congradulations on the restore! This will be your first of many adventures aboard her.

Thanks for the tip. I contacted Richard today and was able to get a full set of cushions for Float on

Thank you! I'm very interested!

I also watched the other videos, The rudder bearing video is exactly what I`ve been looking for, Thanks!

holy cow! thats a hell of a deal! I think I will go ahead and start collecting foam for a custom set.

Ok so here is the story, I have been looking for a trailer sailor for about a year when I saw this Chrysler 22 on ebay in Washington. http://a7.sphotos.ak.fbcdn.net/hphotos-ak-ash3/s720x720/539546_3662064114757_1369324345_33393186_1015045016_n.jpg I ended up winning the auction for $1000. The owner ...

Thank you for the warm reception. I`ll start a new thread telling you about the boat because I have got many questions for you guys.

I need alot to get my boat back on the water. I need the guide rails for the sliding hatch, the hinges for forward hatch, the tiller and connection to the rudder head, swim ladder, cushions, winches, the is about it I believe, shipping to 48103.

Thanks all for the warm welcome! Just alittle about me, I have been in the market for a project boat for the past year, while surfing ebay recently I spotted a 1976 C-22. It was priced right so I put in a bid on it. Which lead me to the Chrysler Sailors forum which I must say has more class then any...

Thank you, I think I will try those made by Ruddercraft.

Is anyone selling cushions for a C-22? The conditon of the cushions I was given with my boat can only be described as moldy and disgusting . I even tried to save them but as I was unzipping them to remove the foam I had zippers flying off and seams ripping left and right. Ive searched through all th...

I`m interested in doing the same with with my 22.

Where did you get the LEDs and what did you get them for? I`d love to hear how it works out for you.

Just bought a new boat. Does anyone have a tiller? I might make one if I cant find one. Any ideas?

http://detroit.craigslist.org/okl/boa/2859381643.html

Does that do you any good? Not my posting but thought it might be helpful

http://detroit.craigslist.org/okl/boa/2859381643.html

Does that do you any good?

I am the winner of the ebay auction, and the newest member of Chrysler Sailors. I will post some photos and let you know her condition when she dropped off by the shipper.