Search found 4 matches

by ktaylor982
Mon Jul 09, 2018 12:53 pm
Forum: General Chrysler Sailing Discussion
Topic: Size of Rope on tiller
Replies: 2
Views: 11534

Re: Size of Rope on tiller

Reality wrote:there are (should be) two jam cleats on the tiller. Diameter would be based on what works with these cleats. 3/8 sounds about right. I'd start with 4' lengths and trim if needed.
Only had one Jam cleat on the tiller. Made it with 3/8 rope but I cut it to 5 feet. it worked out perfect.
by ktaylor982
Mon Jul 09, 2018 12:52 pm
Forum: General Chrysler Sailing Discussion
Topic: Mast Crutch instalation
Replies: 2
Views: 9553

Re: Mast Crutch instalation

I did something similar with mine. Used a 1 1/4" x 4' square tubbing with a 1" x 4' square tubing inside it. Was able to weld a roller on top. that way I can use it to transport the mast then extend it up for mounting. Attached to the transom motor mount but with the engine on its going to...
by ktaylor982
Thu Jul 05, 2018 8:34 am
Forum: General Chrysler Sailing Discussion
Topic: Size of Rope on tiller
Replies: 2
Views: 11534

Size of Rope on tiller

Have noticed a lot of web discussion on rigging and size of running rigging on a Chrysler 22. I have not found out what diameter rope is used on a swing tiller or the length. Need to be replaced and not much to go on. Notice one discussion that a person had used a Green rope for the down position an...
by ktaylor982
Thu Jul 05, 2018 8:29 am
Forum: General Chrysler Sailing Discussion
Topic: Mast Crutch instalation
Replies: 2
Views: 9553

Mast Crutch instalation

Just recently bought a 1976 Chrysler 22. It has been sitting for30 years without being used. Been reading a lot from the forum and the website to get the boat back to pristine shape. Question is how would you attach a Mast Crutch to the back of the C-22? I have seen a lot of them used on Catalina 22...