Rebuilding Rudder on my C22
Posted: Thu Feb 16, 2012 1:32 pm
So I took the rudder off the boat to sand and paint and after reading a post about C26 rudders it got me wondering if the C22 is suppossed to have a spacer on it. I noticed the C26 has a one inch spacer below the mushroom bearing on the shaft did the C22 have one too?
On the front of the rudder cheeks there are 4 screws like something is suppossed to be there, but there is nothing, what goes there, some sort of fairing?
Have you guys put anything on the back/top of the rudder blade to keep it from being munched when the engine s down and running? I was also thinking about something to keep it from getting damaged if the blade swung down and hit the concrete.
What size rubber hose connects the upper/lower mount on a C22?
Trying hard to go sailing this Sunday.
Thanks!
On the front of the rudder cheeks there are 4 screws like something is suppossed to be there, but there is nothing, what goes there, some sort of fairing?
Have you guys put anything on the back/top of the rudder blade to keep it from being munched when the engine s down and running? I was also thinking about something to keep it from getting damaged if the blade swung down and hit the concrete.
What size rubber hose connects the upper/lower mount on a C22?
Trying hard to go sailing this Sunday.
Thanks!