C22 Keel Restoration - Part 3

Post All Keel Topics Here
Post Reply
User avatar
C22Bob
Site Admin
Site Admin
Posts: 143
Joined: Mon Sep 24, 2012 12:03 pm
Location: Knoxville TN

C22 Keel Restoration - Part 3

Post by C22Bob »

Finally got the keel installed. Been about a year since I posted Parts 1 and 2. As those of you know that have done it, it's not something you want to do that often, if ever again :)

In Parts 1 and 2 I showed a design for what I'll call 'Keel Stabilizers'. Basically made a skid plate on both sides of keel and used some plumbing parts to form the stabilizers.
IMG-20150418-00161.jpg
IMG-20160824-00028.jpg
IMG-20160824-00028.jpg (30.04 KiB) Viewed 8658 times
The later model C22s had such a stabilizer, but only on the port side. It was made from a galvanized plumbing flange with a pipe nipple and end cap. The nipple had a nylon rod inserted which pressed against the keel.

Here's the one I pulled from my 1980
http://www.chryslersailors.com/discussi ... =12&t=4852


I wanted to build something along the same design, but more robust. The parts are stainless steel and I installed with some tension on both sides. Honestly, I don't know how much it will really help. I suppose with an extremely worn keel pin it might help to stabilize the keel some. Would be interested in hearing comments.


//Bob
Last edited by C22Bob on Mon Aug 29, 2016 12:19 pm, edited 1 time in total.
User avatar
astrorad
Posts: 730
Joined: Fri Feb 19, 2010 8:09 pm
Location: s.e Wisconsin

Post by astrorad »

Nice work Bob...let us know how it works out under sail.
Bill
Post Reply