79 C 26 Standing Rigging

Here you can discuss Chrysler Sailing across all makes of Chrysler sailboats.
Post Reply
Jeff

79 C 26 Standing Rigging

Post by Jeff »

Hello all. I need the measurements for all of the standing rigging. I bought a C-26 that was never finished. It has the hull, deck and inside liner, but the inside is bare. I have the mast and boom. I looked on the Chrysler Lizards page and did see some measurements but it was very hard to read. Also, I couldn't tell if the lengths were with the ends on the wire or if that is just the wire length?? Any help would be great. I love these Chryslers and would love to sail a brand new on so to speak.
Jeff
User avatar
EmergencyExit
Site Admin
Site Admin
Posts: 2956
Joined: Wed Dec 10, 2003 5:02 pm
Location: Mississippi Gulf Coast

Post by EmergencyExit »

My rigging is lashed to the mast during our project. If you don't get a better answer by the weekend I'll stretch them out and get you some figures.

beau
Jeff

Thanks, stand by.

Post by Jeff »

Thanks for the response. I have done some further investigation and found the mast I have is a Kenyon, not original.....I talked to the guy that owned it and he bought it after he got the bare boat. I'll keep you posted. Jeff
Post Reply