Help I broke my mast step

Here you can discuss Chrysler Sailing across all makes of Chrysler sailboats.

Moderator: CaptainScott

bernina27
Posts: 26
Joined: Wed Mar 19, 2003 11:19 am
Location: Bremerton, WA

Help I broke my mast step

Postby bernina27 » Mon May 19, 2003 8:20 am

Lesson learned; if you are too tired and you can wait until tomorrow, wait.
I brought the mast down not parallel and snapped the hook part of the mast step.

Does anyone know where I can get a new step? Or who the mast maker is for the C22?

What a bummer! :(

Michael O'Brien
Posts: 17
Joined: Wed Mar 12, 2003 7:58 pm
Location: Dallas, Texas

broken mast step

Postby Michael O'Brien » Mon May 19, 2003 8:10 pm

Sorry to hear of the problem - are you using the the optional mast erection bridles? If not, they should help keep the mast on an even plane side to side to avoid this next time. I'll check a source for the step, but it probably could be welded. Also, I noticed your old post on sails. We are using a 150% genoa from a Catalina 22 which seems to work just right, as well as the original Vector sails. Good luck, Michael O'B

User avatar
Rich
Posts: 79
Joined: Tue Mar 11, 2003 3:26 pm
Location: Salem Oregon
Contact:

Postby Rich » Tue May 20, 2003 8:21 am

YIKES! I hope nothing else got hurt in the process. I had to have my tiller mounting bracket replaced, and I had it fabricated at a machine shop, if all else fails you could probably take the broken one and have a new one made? Also, try posting a wanted at places like trailersailor.com classifieds could be there's someone out there with a boat that's in no condition to sail, but the owner would part it out? I'm sure there's some way to get your boat fixed and on the water again quick. :)
"Yeah, God's given us this beautiful day. Let His Spirit fill your soul like the wind in the sails!" -Walkin' on the Docks

User avatar
Wag4513
Posts: 58
Joined: Tue Mar 11, 2003 7:04 pm
Location: Dallas, Texas

Replacement parts

Postby Wag4513 » Tue May 20, 2003 3:04 pm

You might call these folks. Joel is very helpful.

http://www.idasailor.com/

I had them made a new rudder for my C-22.
Jim Laurence
Chrysler C22
Dallas, Texas

bernina27
Posts: 26
Joined: Wed Mar 19, 2003 11:19 am
Location: Bremerton, WA

Thanks for your help

Postby bernina27 » Fri May 23, 2003 12:30 pm

I ended up finding a place that is fabricating it out of stainless steel for $80. It's going to take a week to get the part, so it looks like I'll be working in the yard this weekend instead of sailing. Oh well. Thanks for your help everyone!


Return to “General Chrysler Sailing Discussion”

Who is online

Users browsing this forum: No registered users and 18 guests