LS-13 mast heel, sails
LS-13 mast heel, sails
I picked up an old LS-13 in the hopes of sailing it one day. I noticed it seems to be missing the part that the mast fits onto in the bottom of the boat. I
think it is called the heel. So if anyone has one or can tell me where to get one I would appreciate it. Also am missing the sails and could use a used set.
Thanks,Dennis
think it is called the heel. So if anyone has one or can tell me where to get one I would appreciate it. Also am missing the sails and could use a used set.
Thanks,Dennis
Mast boot fitting
Do you still need the mast fitting? I can get a new one to you.
Best regards,
Maury
989-220-6157
Best regards,
Maury
989-220-6157
MD2020
- mikepaddle
- Posts: 33
- Joined: Tue Aug 23, 2005 10:13 am
- Location: Dallas, TX.
Maury...just curious
Maury,
I am curious as to whether you are parting out several LS-13's or if you have found a source for various old Lone Star parts. I have a 1960 LS-16 (#249) and usually have to "McGuiver" my parts.
Mike
I am curious as to whether you are parting out several LS-13's or if you have found a source for various old Lone Star parts. I have a 1960 LS-16 (#249) and usually have to "McGuiver" my parts.
Mike
ls-13
go to http://www.dwyermast.com/families.asp?c ... Name=Booms
or
http://www.racelitehardware.com/
the 2nd linc is for a company that outfitted the LS boats
or
http://www.racelitehardware.com/
the 2nd linc is for a company that outfitted the LS boats
Ok Dented. Just let me know. I just got back from my cabin and I removed it from the boat and brought it home. I will keep it with me until next weekend and I'll put it back.
I checked out the sites you listed Cliff. Great resources! I bookmarked both pages. I didn't find what dented was looking for though. Awesome stuff on race lite.
Best Regards,
Maury
I checked out the sites you listed Cliff. Great resources! I bookmarked both pages. I didn't find what dented was looking for though. Awesome stuff on race lite.
Best Regards,
Maury
MD2020
Thanks Cliff for the posting. Good stuff to have.
Thanks Maury for looking. I have a question. When looking at the Dwyer mast site if I click on a mast size it comes up with some fittings. Is the thing they call a "step" something I could use for the mast to fit into? I have never seen what was supposed to be on the LS-13 for the mast to set into so I do
not know what it looks like.
Thanks much,Dennis
Thanks Maury for looking. I have a question. When looking at the Dwyer mast site if I click on a mast size it comes up with some fittings. Is the thing they call a "step" something I could use for the mast to fit into? I have never seen what was supposed to be on the LS-13 for the mast to set into so I do
not know what it looks like.
Thanks much,Dennis
LS-13