Wanted: face plate for C-22 rudder assembly

Need certain parts, sails, accessories? Put out a request to the Chrysler Sailing Communty!
Please be sure and include useful information like, location, how much you will pay, etc.

NO COMMERCIAL ADVERTISEMENTS OR BROKER ADS WITHOUT EXPLICIT PERMISSION FROM ADMIN.
Post Reply
steve Souter
Posts: 17
Joined: Tue Sep 01, 2009 11:01 am

Wanted: face plate for C-22 rudder assembly

Post by steve Souter »

Located on the front edge of the rudder housing it is approx. 7 1/2' long and has four screw holes, two on each side.
Email : ssouter63@att.net
Phone 972.406.1033
User avatar
Windward
Posts: 451
Joined: Mon May 14, 2007 1:40 pm
Location: East Tennessee
Contact:

Post by Windward »

Steve,

The original's a plastic fairing. I just made a fairing block from wood, then coated it with epoxy. You could probably use thin wall aluminum tubing, too. Of course, you might get lucky and find someone with an extra...
User avatar
Alanhod
Site Admin
Site Admin
Posts: 1478
Joined: Fri May 16, 2008 4:30 pm
Location: Washington State
Contact:

Post by Alanhod »

It's a good life on the
Honu, 1976 C-22
My Chrysler Sailing Photos: http://s1297.beta.photobucket.com/user/ ... ry/Sailing
Post Reply