Page 1 of 1

any oarts for 1979 C22

Posted: Tue Apr 09, 2013 4:30 am
by airshac
I'm buying a project 22 and need everything except a mast and hull :P. At this point I'm especially interested in sails and rigging, stays and blocks. If you have anything like this please let me know!

Thanks!

Posted: Thu May 30, 2013 4:55 am
by dcurtis
Have you tried ebay? A while back I got into a bidding war for a set of Chrysler sails, but gave up in the end 'cuz mine are still ok. As for the blocks and stuff, I got some of mine from nautical flea markets. I picked up a vertical (bulkhead) mount compass, used, for about $20. My C26 was a stripped down flower pot that I restored and refitted bow to stern. You might also find the classified section at the Chrysler Sailing Lizards site (aka Chrysler Sailing Association).
Best of luck, from someone who's been there.

Posted: Sun Nov 17, 2013 2:28 am
by queenannesrevenge
I don't know what part of the country you're located in but I saw a C22 on ebay last night. It's in Texas, Houston if I remember correctly. It was listed by a company that accepts donated boats and adds a $150 fee on top of the winning bid. I don't know any more than that about the seller. There was alot of gear on the boat, pics showed several sails, don''t remember if there was an outboard but I doubt it and the boat itself had been neglected for a number of years. It was in the water in the pics and did not include a trailer. Being in Houston, close to salt water, I'd bet the keel pin and brackets are in poor shape. There were no bidders on the boat when I saw the ad last night and it had a starting bid of $200. If this is in your neck of the woods you might get a deal on a boat for parts.

C22 parts

Posted: Sun Jul 20, 2014 3:39 am
by billscantlin
I have some parts from a C22
Bow pulpit
seat lid
some hardware

I need to make a new list with pictures,
Let me know if your still looking for parts

Posted: Thu May 21, 2015 5:20 pm
by Sanderscarguy
I need the rear SS tubing on my C22. Not sure if the best way to get it is to buy a used one or have it made somewhere.

Posted: Sat May 23, 2015 5:19 am
by Reality
any marine canvas shop that makes bimini tops will have the SS tubing and can bend/cut what you need.

Posted: Tue May 26, 2015 1:06 pm
by CaptainScott
FYI: check the outboard section,
someone recently posted sails and such for sale there!
Not sure why but you might get more stuff there!



Scott

chrysler parts

Posted: Mon Nov 23, 2015 6:11 am
by billscantlin
I have the front bow and railing and some hardware for a 22.
call Bill at 816-916-9031
I'm located in Kansas city