C22 Rudder Pieces

Here you can discuss Chrysler Sailing across all makes of Chrysler sailboats.
Post Reply
mrichey
Posts: 15
Joined: Thu Mar 05, 2015 7:40 am

C22 Rudder Pieces

Post by mrichey »

In this document on page 333-10:

http://captainscottsailing.com/Chrysler ... Detail.pdf

There are two pieces not shown, 91C and 91D the bushing and sleeve. Does any one have a picture of those pieces? Or a diagram? Crude sketch? Anyone have a place to buy replacements for them?
User avatar
EmergencyExit
Site Admin
Site Admin
Posts: 2956
Joined: Wed Dec 10, 2003 5:02 pm
Location: Mississippi Gulf Coast

Post by EmergencyExit »

Looking at the diagram nothing seems to be missing. There is a bolt and sleeve around it inside the tube/cheeks where the tube meets the cheek - that's what the rudder up pull line goes around. Perhaps that's it. Or its that Rudder stop kit that's also not shown

In case you haven't seen in there are some helpful diagrams on Windward's site at

http://chryslersailing.lizards.net/sail_rudder.html
mrichey
Posts: 15
Joined: Thu Mar 05, 2015 7:40 am

Post by mrichey »

I think it is the bolt and sleeve that I'm missing. No dimensions for the bolt or sleeve in the diagrams that I can see. Any one have those?
User avatar
EmergencyExit
Site Admin
Site Admin
Posts: 2956
Joined: Wed Dec 10, 2003 5:02 pm
Location: Mississippi Gulf Coast

Post by EmergencyExit »

mrichey wrote:I think it is the bolt and sleeve that I'm missing. No dimensions for the bolt or sleeve in the diagrams that I can see. Any one have those?
I checked my C26 and I thinks its about the same as a C22. Bolts is a 1/4"x2". Space in between checks is 1 1/2".

The sleeve over the bolt is whatever you come up with that fits...It really doesn't work very good anyway honestly..always a chore to pull the rudder down..
mrichey
Posts: 15
Joined: Thu Mar 05, 2015 7:40 am

Post by mrichey »

Thank you!
Post Reply