Rudder Raising Clevis Pin (C26)
Posted: Wed Jun 10, 2009 6:37 am
The clevis pin that the rudder raising line wraps around was badly bent. It seems to be a 1/4" x 1 3/4". I haven't been able to find one so far, although I straightened mine out enough to use for now.
Does anyone have a supplier for these?
Are they a weak link and should I consider fitting a larger pin? 5/16" x 1 3/4" are widely available and perhaps the extra strength would be helpful. Any clearance issues?
Does anyone have a supplier for these?
Are they a weak link and should I consider fitting a larger pin? 5/16" x 1 3/4" are widely available and perhaps the extra strength would be helpful. Any clearance issues?