Chrysler Sailors Forum

Does anyone have a clear picture of the original logo that goes on the sides of the boat, back near the stern

I recentally got one fron Alan, but its hard to tell if the letters have lines thru them or if thats something else..

I have a guy that said he can duplicate them fairly easily...

Ihave the diamensions as 3/4" tall x 15" long...

The logo on my C 20 in in real good comdition. I will get a shot to you when I pull her out of the water tomorrow. I am doing a boat/trailer shuffle at the moment. I would really be interested in a couple of logos for me new C 22 if your guy can make these. PM me your e-mail address. Jeff

Jeff..

I sent you a PM..

I will be glad to arrange for all who would like these..once I get the picture from Jeff, I can get a quote from the guy who does them..

Were they all blue? or did the have multiple colors?

Tim

Here is what mine looked like when I got her home.

Here is my new interpretation:

Thank all of you for your logo's..they have all been forwarded onto the graphic designer...I should have a quote on them shortly, which I will post for for your thoughts...

Thanks again...Tim

Tim, Sent you a couple of emails with pics but they both had a failure message for some reason. Looks like you got what you needed anyway. I'll second Alans remarks. Thanks. Jeff

Jeff, I sent you a PM.

Alan,I sent this additional logo to him as well...

Thanks for the color code..it will make things go a lot smoother...

Tim

OEM 1979 C-26 Logo:

Hey Tom and Cathy,

Is that the OEM Chrysler logo on a c-26?

Thanks
Alan

Tom & Cathy, what are the diamensions on the logo?

If you guys could let me know the diamensions for your logos, I will gladley get prices for all of you. I just talked to the gentleman whos going to do them and after I post his prices for everyone to see, I will include his e-mail so that you all can deal with him directly, we will just use a reference in order for him to associate all of us as a group''


http://s958.photobucket.com/albums/ae61/1961skyking/

I forgot to measure it before removal, but dimensions could probably be extrapolated from the toe rail slots.

I was planning on making my own for the 22. I have my own vinyl cutter and make lots of graphics for airplanes, boats, and some cars. I don't want to step on the toes of the guy skyking has lined up, but I would be willing to cut Chrysler logos for the cost of shipping. I will match size and color the best I can with the vinyl I have on hand. Like I said, I was going to cut my own anyway.

Dan

Dan,

If you can do this thats great, I'm just trying to help a guy get started, but hey, Ive sent him some business, so if you would please hook me up with two of the chrysler logos that Alan has posted...as shown in the link below. I believe that they should be 3/4" tall and 15 1/2" long...preferably a blue or black

http://sports.webshots.com/photo/288758 ... 7341ErJHRx

Let me know what you need for shipping..

Thanks Tim

skyking wrote:Dan,

If you can do this thats great, I'm just trying to help a guy get started, but hey, Ive sent him some business, so if you would please hook me up with two of the chrysler logos that Alan has posted...as shown in the link below. I believe that they should be 3/4" tall and 15 1/2" long...preferably a blue or black

http://sports.webshots.com/photo/288758 ... 7341ErJHRx

Let me know what you need for shipping..

Thanks Tim

Tim,

No problem. Give me a day or two and I'll cut some samples and post pics on this thread. As for shipping, probably just a few bucks through USPS. I'll keep you posted.

Dan

Hi Dan,

Just sent you a PM about the logo's.

I can also use the email to your friend with the new graphic business Skyking.

Thanks
Alan

Hello Dan. Same for me on the logos. I would like to have a port and starboard logo in blue. Mine Looks like any of the rest of the logos I have seen on the other C22's. Just let me know what I owe you. Thanks !! Jeff

this is a good thread...


I am about to get my boat paintied and was in a quandry as what to do with the logo... the OEM it is a pretty boring block font.

I was just going to repaint the stripe and say goodbye to the logo ( don't think I would miss it.. )

Has anyone ever figured out what the OEM font is for the logo?

The folks at this company:

http://www.freelanceindy.com/

did the lettering for me on my C22 - including the new CHRYSLER logo. They do a lot of cars given that they are very, very close to the Brickyard in Indianapolis so I guess doing a CHRYSLER logo wasn't difficult for them.

I don't know the font name, but it is very close and they probably have the dimensions and font saved in their computers from when they did it for me.

Mike

Although I dont have the prices yet, here is the e-mail address for the graphic designer..

Chuck Brommer [a_discount_sign_co@yahoo.com]

If you use " Chrysler Sailors" as a reference he will know that your getting this information from this forum...

Please note that I have no ties to this up and coming business, other than , he has done some nice work at a very reasonable price...

What do you think?
This was made for me by"

Chuck Brommer [a_discount_sign_co@yahoo.com]

I created the logo using microsoft excel word art...Chuck did the rest

Here is my first shot at the logo. It isn't the right font, but it's not bad. I could trace the original, but it will take a few hours that I don't have right now. (Getting married in a week)

Here is the link to the new vs. original.
http://picasaweb.google.com/lh/photo/DG ... directlink

I don't know how to add photos directly to the post. I'm going to give this a shot.

<table style="width:auto;"><tr><td><a href="http://picasaweb.google.com/lh/photo/DG ... site"><img src="http://lh3.ggpht.com/_Nd9cNMFmZ-E/TBpIn ... G_4816.JPG" /></a></td></tr><tr><td style="font-family:arial,sans-serif; font-size:11px; text-align:right">From <a href="http://picasaweb.google.com/ercoupedan/ ... 2010-06-15 001</a></td></tr></table>

The photo didn't work.. How do I add photos?

Guster wrote:The photo didn't work.. How do I add photos?

Use the ""

and you will get this:


--Richard

ahh.. Thats easy. Thanks Richard

As you all can see, the font is wrong. Does anyone have a lead on a font that is closer to the original? If I can't find a font, I'll trace it sometime next week.

The font may not be exact but you could not get much closer without being 100% spot on. This is closer then I thought I would ever get on my own.

Thanks
Alan

I agree with Alan....

It looks darn close, I dont think that anyone would notice unless its sitting besides a new chrysler...AND WE KNOW THATS NOT POSSIBLE..