Page 1 of 1
C-22 Mast Erection Pin
Posted: Wed Sep 29, 2010 1:06 pm
by SouthernStar
I just bought a 75 C-22 and it seems to be missing the Mast Erection Pin. I am trying to find one out there, but if not, does anyone have the dimensions?
Posted: Wed Sep 29, 2010 4:01 pm
by Banshi
I am assuming this is the pin used to fix the boom to the mast as a gyn pole. It is just a rod that fits into the hole snugly. You can buy a machine bolt the right size about 5 or 6 inches long. Just cut the head off.
Pin
Posted: Wed Sep 29, 2010 5:11 pm
by SouthernStar
Thanks.
Posted: Wed Sep 29, 2010 8:59 pm
by Paul
Mine was missing too. I used a 9" piece of 5/8 stainless steel rod. Fits the boom & mast real well. Someday I'll actually use it!
Paul
mast raising pin
Posted: Thu Nov 04, 2010 12:25 pm
by steve Souter
I have one if you still need it.
Steve Souter
972.406.1033
ssouter63@att.net
Just make one
Posted: Tue Oct 04, 2011 5:48 pm
by troyengel
I've made two now, I just used a trailer hitch pin, I simply cut it down. works great.