Introduction and Question
Posted: Fri Feb 17, 2006 12:27 pm
Hello to everyone. My name is Ken, and I have owned a Chrysler C22 for almost three years now. My dad was a sailor growing up, and I picked up a few things along the way, but the last three season have been a great time of learning and re-learning for me. I have really enjoyed sailing the boat, and have made some good trips and had great weekends on it to this point. The boat is in good condition for the 1976 model that she is, and I am glad to have found this board to talk other owners of Chrylser sailing boats.
As much enjoyment as our C22 has given us, she has also given us projects. They never seem to end, and they seem to be half the fun. I am currently replacing much of the running rigging, refinishing my tiller and other wood (thank goodness there isnt much), working on a cockpit table design, hatch screens and looking to make a repair to the tiller/rudder assembly.
That brings me to my question. The collar on the upper portion of the tiller rudder assembly has developed a crack! This is leading to some slippage in the tiller rudder connection. Any ideas as to how to either repair this piece of the assembly or where I might find a replacement (I know that may be a longshot.) Thanks in advance.
As much enjoyment as our C22 has given us, she has also given us projects. They never seem to end, and they seem to be half the fun. I am currently replacing much of the running rigging, refinishing my tiller and other wood (thank goodness there isnt much), working on a cockpit table design, hatch screens and looking to make a repair to the tiller/rudder assembly.
That brings me to my question. The collar on the upper portion of the tiller rudder assembly has developed a crack! This is leading to some slippage in the tiller rudder connection. Any ideas as to how to either repair this piece of the assembly or where I might find a replacement (I know that may be a longshot.) Thanks in advance.