Flotation

Post All Paint, Fiberglass, Or Maintenance Topics Here.
Post Reply
george kellock
Posts: 2
Joined: Thu Oct 03, 2013 6:07 am

Flotation

Postby george kellock » Mon Oct 02, 2017 5:20 am

Recently acquired a much abused 1974 C-22 Sandpiper. The foam beneath the
sliding galley bulkhead is comprimised. My inclination is to cut out the top,
replace the foam and reseal. Any thoughts and advice would be greatly
appreciated before I make a major mistake.

Thanks.

George
Top
Reality
Posts: 182
Joined: Sat Oct 11, 2014 7:11 pm
Location: Ellison Bay, WI

Postby Reality » Mon Oct 02, 2017 4:12 pm

IMO not sure I'd replace the foam. If it's a sealed compartment that should be sufficient as a "safety measure". Closed cell foam will be very expensive and open cell will just become water logged again.
Top
Reality
Posts: 182
Joined: Sat Oct 11, 2014 7:11 pm
Location: Ellison Bay, WI

Postby Reality » Mon Oct 02, 2017 4:14 pm

the foam is probably compromised because the toe rail leaks. I'd address that issue first.
Top
Post Reply

Return to “Paints/Fiberglass/Maintenance”

Who is online

Users browsing this forum: No registered users and 0 guests