I want one!

Here you can discuss Chrysler Sailing across all makes of Chrysler sailboats.
Post Reply
tnc110
Posts: 110
Joined: Sat May 30, 2009 6:47 am
Location: WNC

I want one!

Post by tnc110 »

User avatar
CaptainScott
Site Admin
Site Admin
Posts: 3112
Joined: Wed Sep 24, 2008 10:46 am
Location: Washington State
Contact:

Post by CaptainScott »

That is very cool!
Scott
User avatar
thepartydog
Posts: 337
Joined: Tue May 22, 2007 10:50 pm
Location: Crestview Florida

Post by thepartydog »

regeneration, nice, but where would you mount it?
Darin
"Ya Never Know"
1980 C26
User avatar
Alanhod
Posts: 1478
Joined: Fri May 16, 2008 4:30 pm
Location: Washington State
Contact:

Post by Alanhod »

It's a good life on the
Honu, 1976 C-22
My Chrysler Sailing Photos: http://s1297.beta.photobucket.com/user/ ... ry/Sailing
User avatar
thepartydog
Posts: 337
Joined: Tue May 22, 2007 10:50 pm
Location: Crestview Florida

Post by thepartydog »

The price isn't really unreasonable, compared to other solutions. It includes all the parts, except for the batteries.

Having regeneration is huge, if you only motor in and out of the marina, you'll never need to recharge the batteries and would get extra power for your house battery bank.

When I first bought "Ya Never Know" I (under)powered her with a 40# trolling motor. The quiet, no fumes, no oil, not having to "warm up" the motor, were all very, very nice. Unfortunatly safety takes precedence, and not having enough power to turn upwind in any wind over 10 knots or go against any currents created more unsafe situations. Since then, I've been researching all of the options for electric propulsion powerful enough to replace the gas outboard.

Solomon systems have some very nice high end units, but require an inboard or sail drive setup.

A large or multiple trolling motor is the least expensive option, but no regeneration, and you would have to re-rig the controller(s) to use them from the cockpit. If you used two of them, you could place them so that they didn't interfere with the rudder.

There are a several production electric outboards, one from MinnKota, but no regeneration and very close to the price of the e-pod.

You could DIY with a sail drive, inboard setup, or used outboard without the powerhead. With the motor, controller, and assorted parts, you might save half the price of the e-pod unit, maybe. (golf cart motor and controller around $1000-$1300) but you would have regeneration.

Can you tell I've put a little thought into this?
Darin
"Ya Never Know"
1980 C26
tnc110
Posts: 110
Joined: Sat May 30, 2009 6:47 am
Location: WNC

Post by tnc110 »

Could you not mount this motor to the hull...aft the keel? If I had some spare change I would definately have one of these!!! No more solar panels...no more outboard...this thing would really clean up/un-clutter the boat! I too use to use a trolling motor to get in and out of port...I miss the silent operation.
tnc110
Posts: 110
Joined: Sat May 30, 2009 6:47 am
Location: WNC

Post by tnc110 »

Mario G

Post by Mario G »

:arrow: :arrow: I saw the add in "This Old Boat" mag and the day dreaming begins. the battery weight on a C-22 would be the only thing that would concern me. I'm still not sure wher to stuff the first battery.
User avatar
lecker68
Posts: 1095
Joined: Mon Aug 25, 2008 6:44 pm
Location: Catskill, NY

Post by lecker68 »

That would be great to mount between Keel and rudder it would give you better rudder control at low speed for docking.
Catch the wind and ride the wave, Have fun
Lyle
1980 C-26 #1100
S/V My Getaway
http://www.flickr.com/photos/34432376@N06/
User avatar
thepartydog
Posts: 337
Joined: Tue May 22, 2007 10:50 pm
Location: Crestview Florida

Post by thepartydog »

Here is a solomon system for sale used on ebay. It would work with an inboard, or saildrive.

http://cgi.ebay.com/ebaymotors/SolomonT ... iesQ5fGear
Darin
"Ya Never Know"
1980 C26
Post Reply