Where's the boom???
-
bryan
Where's the boom???
Hello all, new member here and very glad that I found this forum to provide a wealth of information regarding Chrysler sailboats. I am thinking of buying a 1980 C-22 and the seller (a non-sailor, selling it for someone else) doesn't seem to have the boom. I'm just wondering if the boom is stored away somewhere and we just don't know where...any thoughts on this? Is there some hidden compartment for storing away the boom? If I get the boat I'll be sure to share some info and photos. Thank you in advance!
-
Mario G
Hey Bryan
Welcome
If you haven't seen the boom its not there, this is the same way I got my 75 C-22.
If thats the only thing missing don't let it discurage you just offer less for the boat. you can get and use booms from other boats if you cant find an original boom.
the Chrysler C-22 is a great boat and if the deal is good I don't think you would be dissapointed.
If you don't get it please post its where abouts and info in the forsale section, we will find it a good home
Welcome
If you haven't seen the boom its not there, this is the same way I got my 75 C-22.
If thats the only thing missing don't let it discurage you just offer less for the boat. you can get and use booms from other boats if you cant find an original boom.
the Chrysler C-22 is a great boat and if the deal is good I don't think you would be dissapointed.
If you don't get it please post its where abouts and info in the forsale section, we will find it a good home
- EmergencyExit
- Site Admin

- Posts: 2954
- Joined: Wed Dec 10, 2003 5:02 pm
- Location: Mississippi Gulf Coast
-
Mario G
- CaptainScott
- Site Admin

- Posts: 3112
- Joined: Wed Sep 24, 2008 10:46 am
- Location: Washington State
- Contact:
It's a good life on the
Honu, 1976 C-22
My Chrysler Sailing Photos: http://s1297.beta.photobucket.com/user/ ... ry/Sailing
Honu, 1976 C-22
My Chrysler Sailing Photos: http://s1297.beta.photobucket.com/user/ ... ry/Sailing
-
bryan
Thanks to all of you for your timely responses - terrific community here.
Just wanted to post an update; today I went to buy the boat and we contacted the actual owner. Surprise - he just might have the boom and some other accessories! This will all be checked and hopefully...by tomorrow I'll be the proud new owner of one cool C-22.
A little more info; this boat is in need of lots of TLC and time investment. I plan on painting it inside and out and will need repairs here and there but, as far as I know, it looks like it might have all or most of the parts. I'm sure I'll be camping out at this forum for info over the winter
Regards
Just wanted to post an update; today I went to buy the boat and we contacted the actual owner. Surprise - he just might have the boom and some other accessories! This will all be checked and hopefully...by tomorrow I'll be the proud new owner of one cool C-22.
A little more info; this boat is in need of lots of TLC and time investment. I plan on painting it inside and out and will need repairs here and there but, as far as I know, it looks like it might have all or most of the parts. I'm sure I'll be camping out at this forum for info over the winter
Regards
Best of luck to you, there real fine boats to sail and work on.
Let us know when you've got it and remember we like photos.
Thanks
Alan
Let us know when you've got it and remember we like photos.
Thanks
Alan
It's a good life on the
Honu, 1976 C-22
My Chrysler Sailing Photos: http://s1297.beta.photobucket.com/user/ ... ry/Sailing
Honu, 1976 C-22
My Chrysler Sailing Photos: http://s1297.beta.photobucket.com/user/ ... ry/Sailing
-
guyaks
Newby Missing a boom also ;-(
Hello, I just bought a C22 on the 18th of November. It is on a trailer and we are going to do a little work on it. It did not have all the deck hardware, and the keel was removed. but i have new keel holder thingy(not sure of the tech name).
does anybody have pictures of their boom? So far i know the boom is 3 1/2" x 1 1/4". The over-all length is 8' 6". without Goose neck.
not sure what a goose neck is?
i thought of just making one out of Cedar(it is light enough), any suggestions.
thanks
does anybody have pictures of their boom? So far i know the boom is 3 1/2" x 1 1/4". The over-all length is 8' 6". without Goose neck.
not sure what a goose neck is?
i thought of just making one out of Cedar(it is light enough), any suggestions.
thanks
It's a good life on the
Honu, 1976 C-22
My Chrysler Sailing Photos: http://s1297.beta.photobucket.com/user/ ... ry/Sailing
Honu, 1976 C-22
My Chrysler Sailing Photos: http://s1297.beta.photobucket.com/user/ ... ry/Sailing
- EmergencyExit
- Site Admin

- Posts: 2954
- Joined: Wed Dec 10, 2003 5:02 pm
- Location: Mississippi Gulf Coast
Welcome ! Guyaks, you'll want to find a regular boom with the right fittings, but I can promise the group that if anybody could make a cedar one, bet it would be you. And I bet this C22 is going to wind up with one sweet handmade tiller at some point. I'll let everyone else figure out why I say that
Oh, and a sweet dink as well.
The gooseneck is a universal joint that lets the boom swing side to side and up and down.
Here's pics from the C22 Manual of the boom end and the gooseneck


The gooseneck is a universal joint that lets the boom swing side to side and up and down.
Here's pics from the C22 Manual of the boom end and the gooseneck


-
guyaks
Manual??
Did i hear you say manual?? where would i get a manual?? Thanks about the cedar comment, the tiller is a mess and i am going to laminate on up this week....after thanksgiving.
you guys have given me sooo much great advice. if it is okay, i will ask more questions later.
thanks so much !!!
you guys have given me sooo much great advice. if it is okay, i will ask more questions later.
thanks so much !!!
- EmergencyExit
- Site Admin

- Posts: 2954
- Joined: Wed Dec 10, 2003 5:02 pm
- Location: Mississippi Gulf Coast
You can download a low res version From This Page courtesy of Sailfrog.
I also have a hi res version that Mariner provided based on Sailfrog's originals, but they are large. 16 Mb on the C22 and crystal clear. If you like I can email you one of the hi-res ones.
Questions, please just ask away !
I also have a hi res version that Mariner provided based on Sailfrog's originals, but they are large. 16 Mb on the C22 and crystal clear. If you like I can email you one of the hi-res ones.
Questions, please just ask away !
-
guyaks
hi res manual
If you could e-mail the hi res manual....that would be fantastic...i was looking at the the low res manual, and it did have alot of great info..the pics were hard to make out.
here is my e-mail address: guyaks@aol.com
but if you have a hard time e-mailing to that address use my work one.
gdamato@kemperbusiness.com
thanks again...you guys have been such a big help!!!
here is my e-mail address: guyaks@aol.com
but if you have a hard time e-mailing to that address use my work one.
gdamato@kemperbusiness.com
thanks again...you guys have been such a big help!!!
I also have the hi res manuals hosted on my site. You can download the zip file here:
http://www.canoemn.com/d/1604-1/Chrysle ... 9d71c6537d
This has all the Chrysler manuals in the zip. Just trying to save some of EE's bandwidth.
http://www.canoemn.com/d/1604-1/Chrysle ... 9d71c6537d
This has all the Chrysler manuals in the zip. Just trying to save some of EE's bandwidth.
Could I possibly get a copy too?
I tried to get the high res download, but I was one of the ones that had issues.
j42goose@hotmail.com
Thanks
I tried to get the high res download, but I was one of the ones that had issues.
j42goose@hotmail.com
Thanks
"The pessimist complains about the wind; the optimist expects it to change; the realist adjusts the sails." - William Arthur Ward
jerecaustin.com
jerecaustin.com
- EmergencyExit
- Site Admin

- Posts: 2954
- Joined: Wed Dec 10, 2003 5:02 pm
- Location: Mississippi Gulf Coast
-
Mario G
-
bryan
- EmergencyExit
- Site Admin

- Posts: 2954
- Joined: Wed Dec 10, 2003 5:02 pm
- Location: Mississippi Gulf Coast
- CaptainScott
- Site Admin

- Posts: 3112
- Joined: Wed Sep 24, 2008 10:46 am
- Location: Washington State
- Contact:
- Capt. Bondo
- Posts: 713
- Joined: Thu Aug 20, 2009 8:08 am
- Location: Hudson, WI